Martin MAC Aura XB

 

Товар в наличии

Martin MAC Aura XB, Б/У!
КОЛИЧЕСТВО: 90 шт.!
Состояние хорошее!
Наработка: 3000-4000 часов!
Оригинальный кофр в наличии!
Цена: 137000руб./шт.
Доставка до г. Москва 35-45 дней! (включена в стоимость)

FEATURES

  • Super-bright single-lens wash with fully premixed color
  • Broad color palette, RGBW color mixing
  • Eye-candy Aura Effect™
  • Uniform shades
  • Built-in FX engine
  • 10 to 60° uniform zoom
  • 6000 Lumens output
  • Rapid movement
  • Compact, low weight design (6.5 kg)
  • High efficiency, low power consumption, long lifetime

SPECIFICATIONS

  • PHYSICAL
    Length: 302 mm (11.9 in.) across yoke
    Width: 302 mm (11.9 in.) across yoke
    Height: 360 mm (14.2 in.), head straight up
    Weight: 6.5 kg (14.4 lbs.) without accessories

    DYNAMIC EFFECTS
    Beam color mixing: RGBW
    Aura (secondary lens array illumination) color mixing: RGB
    Beam color temperature control: CTO, variable 10,000 — 2500 K
    Beam and aura electronic ‘color wheel’ effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color
    Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects
    Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined
    Electronic dimming: Independent beam and aura, four dimming curve options
    Pan: 540°
    Tilt: 232°
    Pan and tilt speed: Adjustable via onboard control panel and DMX

    CONTROL AND PROGRAMMING
    Control systems: DMX, RDM
    Control options: Independent or synchronized Beam and Aura control
    Control resolution: 8-bit, with 16-bit control of pan & tilt
    DMX channels: 14/25
    Setting and addressing: Control panel with backlit graphic display
    DMX compliance: USITT DMX512-A
    RDM compliance: ANSI/ESTA E1.20
    Transceiver: RS-485
    Firmware update: Via DMX with Martin™ USB Duo DMX Interface Box

    OPTICS AND PHOTOMETRIC DATA
    Light Source: 19x 15W RGBW LED Array System
    LED Refresh Rate Beam: 1200 Hz
    LED Refresh Rate Aura: 4395 Hz
    Total luminous output (wide, one-tenth peak): 6000 lumens
    Total luminous output (narrow, one-tenth peak): 4300 lumens
    Binning: Tight color and flux binning
    Calibration: Full Gamut Color Calibration
    Color Modes: Extended Mode, Calibrated Mode and Raw Mode
    Video compatibility: Designed for use with HD/high-speed video cameras
    Minimum LED lifetime: 50,000 hours (to >70% luminous output)*
    *Figure obtained under manufacturer´s test conditions


    CONSTRUCTION
    Housing: High-impact thermoplastic, flame-retardant to UL 94 5VA
    Color: Black
    Protection rating: IP20

    INSTALLATION
    Mounting points: M12 hole for rigging clamp, attachment points for surface-mounting bracket
    Location: Indoor use only, must be fastened to surface or structure
    Orientation: Any
    Minimum distance to combustible materials: 200 mm (8.0 in.)
    Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.)

    CONNECTIONS
    AC Power: Neutrik PowerCON TRUE1 NAC3PX dual socket
    AC power input socket: Accepts Neutrik PowerCON TRUE1 NAC3FX-W cable connector
    AC power thru socket: Accepts Neutrik PowerCON TRUE1 NAC3MX-W cable connector
    DMX and RDM data in/out: 5-pin locking XLR

ELECTRICAL
          AC power: 100-240 V nominal, 50/60 Hz
          Typical half-cycle RMS inrush current: 10.7 A
          Power supply unit: Auto-ranging electronic switch mode
          Typical power consumption, all effects static, zero light output: <25 W
          Maximum total power consumption: 400 W

Поделиться: